1.Iron Pipe, threaded ends, 1-1/2" to 3" diameter, 3" to 8" long.
2.Two (2) iron pipe caps
3.Explosive or propellant
4.Nonelectric blasting cap (Commercial or military)
5.Fuse cord
6.Hand Drill
7.Pliers
1) Place blasting cap on one end of fuse cord and crimp with pliers.
2) Screw pipe cap to one end of the pipe. Place fuse cord with blasting cap into the opposite end so that the blasting cap is near the center of the pipe.
3) Pour explosive or propellant into pipe a little bit at a time.
4) Drill a hole in the center of the unassembled pipe cap large enough for the fuse cord to pass through.
5) Wipe pipe threads to remove any filler material. Slide the drilled pipe cap over the fuse and screw handtight onto the pipe.
This is how to build one.
Materials needed
1.Iron Pipe, threaded ends, 1-1/2" to 3" diameter, 3" to 8" long.
2.Two (2) iron pipe caps
3.Explosive or propellant
4.Nonelectric blasting cap (Commercial or military)
5.Fuse cord
6.Hand Drill
7.Pliers
1) Place blasting cap on one end of fuse cord and crimp with pliers.
2) Screw pipe cap to one end of the pipe. Place fuse cord with blasting cap into the opposite end so that the blasting cap is near the center of the pipe.
3) Pour explosive or propellant into pipe a little bit at a time.
4) Drill a hole in the center of the unassembled pipe cap large enough for the fuse cord to pass through.
5) Wipe pipe threads to remove any filler material. Slide the drilled pipe cap over the fuse and screw handtight onto the pipe.
Most good explosives will work well inside it.
Some school shooter edgelord cringe shit right here.